PRE-TUNED & PRE-SETUP:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

ProTek R20 BNF Specs:

• VTX: SucceX Mini Force 5.8GHz 600mW VTX Adjustable
• Weight: 89.2g (without battery)
• Bottom plate thickness: 2.5mm
• Motor: XING-E 1105 6500KV
• Top plate thickness: 1.5mm
• Body Size: 132mm*122mm
• FC pattern: 25.5*25.5mm
• FPV cam spacing: 14mm
• Whoop F4 AIO 1.1
• Arm Thickness: 2.5mm
• Propeller size: 2 inch
• Wheelbase: 94mm

Specifications:

AIO//Whoop AIO F4 V1.1 AIO

• Mounting pattern: 25.5*25.5mm/φ3mm
• Firmware Target: IFLIGHT_F411_PRO
• Constant current: 20A，25A (Burst)
• Config：IFLIGHT_F411_PRO.config
• Connector: Micro-USB
• ESC Firmware: Q-H-15
• Current sensor: yes
• BEC output: 5V 2A
• ESC Telemetry: NO
• Size: 30.5*30.5mm
• MCU: STM32F411
• BLHeli: BLHeli-S
• Barometer: NO
• Blackbox: 8MB
• Gyro: BMI270
• INA pad: nR2
• Weight: 7.4g
• Input: 2-4S

VTX//SucceX Mini Force 5.8GHz 600mW VTX Adjustable

• Power: PIT/25/200/400mW/600mW
• Antenna interface: MMCX
• VTX protocol : IRC Tramp
• Output 40 channels. 
• Size: 29*29mm
• Mounting pattern: 20*20Φ3/25*25 mmΦ2
• Weight: 4g

ProTek R20 Analog Quad BNF Included Components and Parts

pre-built and tested Quadcopter

• 1x iFlight Lipo Strap 10*150mm (Color May Vary)
• 2x HQ 2*2*3 (Set of 4 - Color May Vary)
• 1x ProTek R20 AnalogBNF