The QQ series of printers are of the Delta design. This means they are far faster than the traditional, flatbed design of other manufacturers due to the lightweight moving parts. The QQ can run at speeds of up to 300mm/second and has been voted as the fastest 3d printer available in 2021. Traditional designs are limited to 80mm/s for similar quality.
The QQ design also offers a larger print area than most, specified as 255mm x 255mm(for most designs you can use the full 265mm of the bed).
Additionally, it is taller than most printers, it is specified at 360mm (most have over 370mm clearance).
The QQ is also a32-bit processor! Most have just an 8-bit motherboard. 32 bit allows for faster processing of the data, for a smoother print.
It has a Full-Colour touchscreen, with a user-friendly menu system. Most have a simple pixeled design, with a knob you rotate and press to select items.
The QQ series is very user friendly out of the box, are 90% preassembled, yet will produce quality to match any other unit in this price band.
FLSUN QQ-S is designed for speed, the printing speed is 1.5 times that of the I3 structure printer, and the printing accuracy is the same. Relying on the high-speed products and high-quality services, it has been unanimously recognized by customers at home and abroad. It has a flexible three-axis linkage system, a powerful 32-bit motherboard, a 24V power supply, a lattice hot bed, and an all-metal side shell to ensure better printing quality and a more stable structure.
When compare with FDM 3D Printers, Delta 3D Printers are:
Excellent in printing in HEIGHT
Light, thus easy to move
Instant change of direction possible
More accurate in the centre than on outer limits
Easy to MAINTAIN and UPGRADE
HIGH PRINT SPEED and ACCURACY
Benefit:
Easy to assemble and setup, taking around 20 minutes
Auto-leveling is also easy to do, just make sure to clean and pre-heat the nozzle
Get great looking prints straight out the box without tinkering
Relatively quiet 3D printer so it doesn’t have to be a disturbance below 50dB
32-bit controller gives a smoother printing experience
Ultrafast 3D printing speeds
Supports flexible filament
Cooling system increase lifespan of the 3D printer
Nice responsive touchscreen with simple icons
Each 3D printer factory-tested 48 hours before packing
Peace of mind with the power resume function
FLSUN Facebook group for support and assistance
Great packing on the 3D printer
Bullet Points:
Printing speed can reach 60-120mm/s, faster than the average printer
Automatic bed leveling with sensor
New automatic leveling method using automatic level sensor.
Power resume function, save time and materials
Lattice bed - 255X 360 mm Large build size
Providing a strong adhesion during the print and to be easily taken off, once the print is completed and the bed is cooled.
Titan extruder-smooth filament feeding and strong extrusion
In addition to the standard 0.4 mm extrusion nozzle, it can also accommodate 0.2 mm and 0.3 mm nozzles (not included), enabling finer printing.
With a maximum temperature of 270 ° C, QQ-S PRO can handle most common printing filaments, such as ABS PLA, PVA and wood.And there are flexible materials and HIPS support materials.
32-Bit Motherboard
QQ-S PRO is equipped with a 32-Bit motherboard and a separate MOS module, allowing for stable prints even at high printing speed.
Full-color touch screen control, support offline printing
Quiet printing, noise below 50 dB
90% pre-assemble, enjoy fast modular installation
WIFI remote control, can control the printer with your phone, making settings and controls more convenience
![Auline 21700 40T 4000mAh 6S 35A 22.2V Li-ion Battery XT60 [DG]](http://www.fpvfaster.com/cdn/shop/files/1_43a5bc61-5c71-4c1e-9f7c-fbcd7f2fcccc_300x300.jpg?v=1705964615)
![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://www.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_300x300.jpg?v=1722313885)
$1.00
Was: $2.00
$51.00
Was: $60.00
$12.00
Was: $16.00
$8.00
Was: $11.00
