HappyModel Mobula6 2024 1S Micro FPV TinyWhoop ELRS

  • $110.00
  • Save $22



HappyModel Mobula6 2024 1S 65mm Ultra Light Micro FPV TinyWhoop ELRS

*Compatible Battery BETAFPV 300mAh 1S BT2.0

Features:

  • AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
  • Super light 1S 65mm Brushless whoop only 17.7g
  • Equipment with the lightest brushless motors-SE0702 only 1.46gram
  • FX17-B 1/3 CMOS 800TVL Camera awesome footage
  • Smooth and powerful
  • Compatible with 1S Lipo/LIHV (GNB A30 Connector) or BT2.0 Connector
  • Note: Battery Not Included


Specifications:

  • Brand Name: Happymodel
  • Item Name: Mobula6 2024 1S 65mm ultra-light micro FPV Whoop
  • Wheelbase: 65mm
  • Size: 81mm*81mm*37mm
  • Weight: 17.7g


Receiver Option:

  • 2.4GHz ExpressLRS Serial receiver


Spare Parts Specifications:

Motor

Mode: SE0702 KV28000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only

Propellers

Materials: PC

Inch: 31mm   

Pitch: 0.8 in 

Weight: 0.21g    

Mount hole diameter:  1mm

Flight controller

SuperX ELRS AIO 5-IN-1 Flight controller

MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
Sensor:BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC

Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
Built-in UART ExpressLRS v3.0.0
Built-in voltage meter sensor, voltage meter scale 110

Built-in current meter sensor, current meter scale 1175

Onboard 4in1 ESC

Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay v0.19.2
Default protocol: DSHOT300

Recommend ESC Startup power value to min1100/max1200

Onboard Serial ExpressLRS receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz

Antenna: Enameled copper wire antenna
Telemetry output Power: <12dBm

Receiver protocol: Serial_based CRSF

Compatible with ExpressLRS V3.x.x TX Module

Could flash single ELRS receiver firmware by Wifi

ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx

Onboard 5.8g VTX

Firmware version: OPENVTX

MSP VTX

PIT Mode support

Channels:40ch

Transmitting Power: 0/RCE/25mw/100mw/400mw

Power supply: DC 5V

Current (5v): <650ma (400mw)

Antenna connector: U.FL

FX17-B Camera

Model: FX17-B

Image Sensor: 1/3" CMOS

Horizontal Resolution: 800TVL

FOV 150°

Signal System: NTSC

Net Weight: 1.5g

Dimensions: L14mm*W14mm*H13mm


Package Includes:

Item Name

Qty

Mobula6 2024 1S 65mm whoop Drone Frame +Canopy

1

SuperX ELRS AIO 5-IN-1 Flight controller

1

SE0702 KV28000 brushless motor

4

Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)

1

FX17-B 1/3 CMOS 800TVL camera NTSC 4:3

1

Onboard 5.8G 25mw~400mw VTX

1

Spare canopy

1

Propeller disassemble tool

1

Screwdriver

1