![Auline 21700 40T 4000mAh 6S 35A 22.2V Li-ion Battery XT60 [DG]](http://www.fpvfaster.com/cdn/shop/files/1_43a5bc61-5c71-4c1e-9f7c-fbcd7f2fcccc_300x300.jpg?v=1705964615)
AocodaRC F465S V4 Stack F405 V4 FC 65A 4IN1 3-8S ESC 30.5x30.5mm
FC Specifications
- MCU: STM32F405RGT6, 168MHz, 1MB Flash
- Board V3.0-ICM Version: IMU: ICM42688 (SPI1)
- Board V3.0-MPU Version: IMU: MPU6888 (SPI1)
- Gyro: ICM42688P(SPI1)
- Baro: SPL06-001(I2C1)
- OSD: AT7456E(SPI2)
- Blackbox: 16MB(SPI3)
- Motor Output: 8ch
- 5x Uarts (1,2,3,4,5)
- 10x PWM outputs(including “LED strip” pad)
- 1x I2C
- 3x ADC (VBAT, RSSI, CURR)
- 3x LEDs for FC Status (Blue, Red) and 3V indicator(Red)
- Built-in inverter for SBUS input
- USB Type-C
- Dual camera input and free switching
- Receiver: ELRS/CRSF/S.BUS/Frsky/Futabayfysky/TBs Crossfre/DSMX
- Firmware Name: AOCODARCF405V3
- Supported firmware: BetaFlight, INAV, ArduPilot(ChiBiOS)
- DJI FPV OSD is supported by any spare Uart
ESC Specifications
- Continuous Current: 65A*4
- Peak Current: 75A*4
- Input Voltage: 3~8S Lipo
- BEC output: No
- Temperature: No
- DEO: DShot150/300/600&MultiShot/OneShot etc.
- ESC Firmware: Bluejay D_X_30_v0.21.1-RC1-hex
FC Physical
- Dimensions: 37mm*37mm
- Mounting Hole: M3 30.5mm*30.5mm
- Weight: 9.4g
ESC Physical
- Dimensions: 44.5mm*40.5mm
- Mounting Hole: M3, 30.5mm*30.5mm
- Weight: 15.8g
Including
- F405 V4 FC*1
- 65S 8BIT 4IN1 ESC*1
- 8Pin SH1.0 Wiring Harness*1
- M3*8mm Shock-absorbing Ball*8
- Nut*8
- M3*30mm Metal screw*4
- 35V 1000uF capacitor*1
- XT60 Power Lead*1
![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://www.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_600x600.jpg?v=1722313885)
