Matek F411-WTE F4 Wing Flight Controller 22x22mm

  • $51.00



Matek F411-WTE F4 Wing Flight Controller 22x22mm

FC Specifications

  • MCU: 100MHz STM32F411CEU6
  • IMU: BMI270 (SPI)
  • Baro: SPL06-001 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: No
  • 2x Uarts
  • 2x Full Softserial
  • 6x PWM outputs (2x Motors, 4x Servos)
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Built in inverter on UART2-RX for SBUS input
  • Switchable Dual Camera Inputs
  • Vbat power ON/OFF switchable for VTX and camera
  • PPM receiver: not supported

 

Power

  • 6~30V DC IN (2~6S LiPo)
  • 132A Current Sense (Scale 250)
  • PDB/Current sense resistor: 90A continuous, 132A burst.
  • BEC 5V 1.5A for FC & Peripherals
  • BEC Vx 5A for servos, 5V/ 6V option
  • Vbat for VTX and camera (ON/OFF switchable)
  • LDO 3.3V 200mA
  • Battery Voltage Sensor: 1k:10k

 

FC Firmware

  • INAV Target: MATEKF411TE ( INAV4.1 or newer)

 

Physical

  • Dimensions: 31 x 26 x 16.5 mm
  • Mounting: 22 x 22mm, Φ2mm
  • Weight: 10g

 

Including

  • 1x FC F411-WTE
  • Dupont 2.54 pins  (Board is shipped unsoldered)

 

Tips

  • F411-WTE has INAV fw 4.1.0 preloaded for QC
  • Download INAV firmware 4.x.x from our website(click “Firmwares” button at upper right corner)
  • Start with INAV5.0, MatekF411TE target will be listed in INAV configurator.