Sub250 Whoopfly16 RTF Combo Kit

  • $252.00
  • Save $36



Sub250 Whoopfly16 RTF Combo Kit Mode 2

Sub250 highly recommends the new Whoopfly16 RTF Kit in 2023! It will be a brilliant choice for new FPV beginners to start flying. Comes with a Whoopfly16 Analog Elrs 2.4gHz FPV drone, MicroRadio Elrs 2.4gHz transmitter, and Goggles 01.

Whoopfly16 is an inverted pusher with a protective frame FPV drone. It combines the characteristics of a short wheelbase for smooth indoor flight and the protection ring has strong protection characteristics.

Sub250 MicroRadio Elrs 2.4gHz remote control with a maximum transmission power of 500mW, 8 channels of ultra-low latency, replaceable 18650 batteries, and support type-c charging.

The FPV Goggles 01 use dual antennas to receive picture signals at the same time, support card recording DVR, built-in 3.7V 2000mAh battery that can be used for up to 2.5 hours, support USB fast charging, and one-key search frequency point. The multi-function menu design makes the operation more convenient.

Note: 1. The drone default to the angle mode.  You can  connect betaflight configurator and install more mode!(2023.07.04)
2. Update: The drone has been bound to the radio's default factory settings!

Sub250 Whoopfly16 Analog Elrs 2.4G Tiny Whoop 75mm

Specifications

  • Product name: Whoopfly16 Analog Elrs 2.4
  • Frame: WF16
  • Wheelbase size: 75mm
  • Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC
  • MCU: STMF411
  • IMU: ICM42688-P
  • OSD: BetaFlight OSD w/AT7456E chip
  • ESC: Redfox A1 4IN1 5A ESC
  • VTX: VTX 5.8G 200mW
  • Lens: Caddx Ant eco
  • Propeller: Gemfan 1608-3
  • Antenna: 5.8g copper tube antenna 70mm
  • ELRS Version weight: 35.2g
  • Receiver: ELRS 2.4G (SPI)

 

SUB250 MICRORADIO ELRS 2.4G TRANSMITTER

Specifications

  • Product name: MicroRadio
  • Size:147*135*71mm (Not including antenna)
  • Weight:223g
  • Adapted Drone Type: Multirotor, Airplane
  • Frequency band:2.4GHz ISM
  • Input voltage:6.6-8.4V
  • Antenna interface: SMA
  • Power:100/250/500mW
  • Channel:8 channel
  • Charging interface: USB-C
  • Firmware upgrade: Support
  • Bluetooth joystick: Support
  • Note: Not including Remote Control's Battery

 

Sub250 Goggles 01

Specifications

  • Product name: Goggles 01
  • Resolution:800*480px
  • Size of screen: 4.3 inch
  • Size: 155mm*144mm*113mm
  • Built-in Batteries: 3.7v / 2000 mAh
  • Working Time: 2.5 hours
  • Weight: 314.6g

 

WHOOPFLY16 RTF KIT'S PACKAGE INCLUDES:

  • 1x Whoopfly16 Analog Elrs 2.4g FPV Drone
  • 1x MicroRadio
  • 1x Sub250 Goggles 01
  • 1x Sub-CW1 charger
  • 2x Sub250 530mAh 90C 1S batteries
  • 4x 1608-3 Propellers
  • 1x Phillips screwdriver
  • 1x L-type Allen screwdriver (1.5mm)
  • 1x Portable Storage Bag

 Whoopfly16 RTF Basic Teaching

  1. Whoopfly16 RTF Basic Teaching
  2. Open the bag
  3. Take out the radio/ goggles /drone/ and batteries
  4. Take out two 5.8g antennas and install them on the goggles
  5. Mounting the single antenna on the radio
  6. Long press the radio power button to power the radio first
  7. Long press the goggles power button to power
  8. Plug in the battery to power the drone
  9. The batteries can be recharged via Sub250-CW1 charger
  10. The drone has been bound to the radio's default factory settings
  11. Just place all the levers at the top and the throttle at the bottom
  12. Pull the leftmost lever down, and the drone is unlocked
  13. The drone default to the angle mode. You can connect betaflight configurator install more mode
  14. Short press the menu button of goggles to enter the one-click search mode
  15. The goggles will automatically select best signal channel according to the signal strength
  16. Wearing your goggles to start flying now!



    Customer Reviews

    Based on 1 review Write a review