TransTEC Beetle HOM HD 2.5" Cinewhoop BNF without DJI Air-Unit

  • $152.00

TransTEC Beetle HOM HD 2.5" Cinewhoop BNF without DJI Air-Unit

Be sure to choose whether or not you want a DJI Air Unit included!

This version of the Beetle includes the updated FC. You can easily install your third party receiver (Crossfire, R-XSR) or use your DJI remote controller! 

Check out battery here: 

Infinity 3S 550mAh 85C Graphene Lipo Battery XT30

Infinity 3S 450mAh 85C Graphene Lipo Battery XT30

The TransTEC Beelte is an ultra lightweight HD FPV drone designed around the DJI Digital FPV System. An incredibly compact 2.5" whoop style quad available with or without a DJI air unit, this is a great option for anyone who has an air unit without a home and is looking to try out HD Micros! 


  • Frame Size: 130mm
  • FC: TransTEC F411 HD 
  • ESC: TransTEC 25A Blheli_S 4in1 3-5S
  • Motor: TransTEC 1106 Freestyle
  • Bottom Plate: 2.5mm High Quality Carbon Fiber
  • LEDs: 9 RGB LED (Betaflight Programmable)
  • Props: Gemfan 2540-3 (The prop color and model may vary)
  • Antenna : Custom Linear Antenna (almost same performance with DJI antenna)
  • Weight: 134g (w/o prop guards)
  • Less than 200 gram take off weight!


  • MCU : STM32F411
  • IMU : MPU6000 Low noise with power filter
  • Anti-Vibration silicone grommets built in
  • 2x Uarts(1,2,4,5) with built-in SBUS inversion
  • 4x Dshot/Proshot/Oneshot outputs(Support Bidshot)
  • 1x JST-SH 1.0_8pin connector (G/Vbat/S1/S2/S3/S4/Current/R4) for Dji Vtx
  • 1x GH_1.25_6pin connector for DJI HD Vtx
  • WS2812 Led Strip support(5V output)
  • Input : 6~20V (2~4S LiPo)
  • BEC : 5V 2A cont. (Max.3A)
  • LDO 3.3V : Max.200mA
  • USB Type-C connector


  • Input Voltage : 3-5S
  • Max Current : 35A(10s)
  • Continuous Current : 25A
  • Connect pin : 6pin
  • Mount hole : 20x20


  • 1x Beetle HD
  • 2x Replaced Canopy x2
  • 4x Propller Guard 
  • 2x Propller Set
  • 1x Battery Strap
  • 1x Motor Screw Set for Guards
  • 1x DJI Camera Protector TPU